How To Resurface Concrete Patio

Resurfacing a concrete patio is a great way to give it a new look and feel, and it can also help to protect it from damage. With the right materials, a little bit of time, and some elbow grease, you can resurface a concrete patio yourself.

Materials You Will Need:

Concrete resurfacer
Concrete cleaner
Acid etch
Primer
Masonry brush or roller
Float
Edger
Broom or brush
Hose
Bucket
Safety glasses
Gloves

Instructions:

1. Prepare the concrete surface

The first step is to prepare the concrete surface. This involves cleaning it thoroughly to remove any dirt, debris, or grease. You can use a concrete cleaner and a scrub brush to do this. Once the surface is clean, rinse it off with water and allow it to dry completely.

2. Etch the concrete surface

Once the concrete surface is dry, you need to etch it. This will help the resurfacer to adhere to the concrete. You can use an acid etch for this. Apply the acid etch to the concrete surface and allow it to sit for the amount of time specified on the product label. Once the etch has sat for the required amount of time, rinse it off with water and allow the surface to dry completely.

3. Apply primer

Before you apply the resurfacer, you need to apply primer to the concrete surface. Primer will help the resurfacer to adhere to the concrete and will also help to prevent the resurfacer from cracking or peeling. Apply the primer to the concrete surface using a masonry brush or roller and allow it to dry completely.

4. Apply the resurfacer

Once the primer is dry, you can apply the resurfacer. Resurfacers come in a variety of colors and textures, so you can choose the one that best suits your needs. Apply the resurfacer to the concrete surface using a float and work it into the surface until it is smooth. Once the resurfacer has been applied, allow it to dry completely.

5. Finish the surface

Once the resurfacer is dry, you can finish the surface to give it the desired look and feel. You can use an edger to create a smooth edge around the patio or you can use a broom or brush to create a textured surface. Once you are satisfied with the finish of the surface, allow it to dry completely.

Tips:

* If you are resurfacing a large concrete patio, it is best to work in sections. This will help to prevent the resurfacer from drying too quickly and cracking. * Be sure to follow the manufacturer's instructions for the concrete resurfacer, primer, and acid etch. * Wear safety glasses and gloves when working with concrete resurfacer and acid etch. * Allow the concrete patio to dry completely before using it.