How To Rescreen Patio Door

If your patio door screen is torn or damaged, you can replace it yourself with a few simple tools and materials. Here's a step-by-step guide on how to rescreen a patio door:

Materials You'll Need:

To rescreen a patio door, you'll need the following materials:

New screening material
Spspline
Spline roller
Utility knife
Measuring tape
Scissors
Flathead screwdriver

Step-by-Step Instructions:

1. Remove the old screen. To remove the old screen, start by removing the spline that holds it in place. Use a flathead screwdriver to gently pry the spline out of the groove. Once the spline is removed, you can pull the old screen out of the frame. 2. Clean the frame. Once the old screen is removed, clean the frame to remove any dirt or debris. This will help the new screen to adhere properly. 3. Measure and cut the new screen. Measure the opening of the patio door frame and cut the new screen to size. Make sure to leave about 1 inch of extra material around all sides. 4. Install the new screen. Place the new screen over the patio door frame and secure it with the spline. To do this, insert the spline into the groove around the frame and use the spline roller to roll it into place. 5. Trim the excess screen. Once the spline is in place, trim the excess screen around the edges with a utility knife. 6. Reinstall the patio door. Reinstall the patio door in the frame and secure it with the screws.

Tips:

Here are a few tips for rescreening a patio door:

Use a high-quality screening material that is resistant to tearing and UV damage.
Make sure to stretch the screen tightly when installing it to prevent sagging.
Use a spline roller to ensure that the spline is properly seated in the groove.
Trim the excess screen carefully to avoid cutting the new screen.
Reinstall the patio door securely to prevent it from falling out.