How To Rescreen A Patio Screen Door

Rescreening a sliding patio door is a relatively simple and inexpensive DIY project that can make a big difference in the appearance and functionality of your home. If your patio screen door is torn, damaged, or simply looking its age, rescreening it is a great way to give it a new lease on life. Plus, it's a project that most homeowners can complete in a few hours with just a few basic tools.

Tools and Materials

* New screening material * Spline * Spline tool * Utility knife * Scissors * Screwdriver or drill

Instructions

1. Clean the frame. Before you begin rescreening, it's important to clean the frame of the sliding patio door. This will remove any dirt or debris that could get trapped between the screen and the frame. 2. Remove the old screen. Once the frame is clean, you can begin removing the old screen. To do this, simply use a utility knife to cut the spline around the edges of the frame. Be careful not to cut through the frame itself. 3. Cut the new screen to size. Once the old screen is removed, you can cut the new screen to size. To do this, measure the width and height of the frame and add 2 inches to each side. This will give you enough extra material to wrap around the edges of the frame. 4. Install the new screen. Once the new screen is cut to size, you can begin installing it. To do this, simply start by centering the screen on the frame. Then, using a spline tool, insert the spline into the groove around the edges of the frame. Be sure to pull the spline tight so that the screen is secure. 5. Trim the excess screen. Once the spline is installed, you can trim the excess screen around the edges of the frame. To do this, simply use a utility knife to cut off the excess material. 6. Reinstall the door. Once the screen is trimmed, you can reinstall the door. To do this, simply lift the door into place and secure it with the screws or bolts.

Tips

* If you're not sure how to install the spline, there are plenty of helpful resources available online. You can also watch a video tutorial to get a better idea of the process. * It's important to use a sharp utility knife when cutting the spline. This will help to ensure a clean cut and prevent the spline from tearing. * Be sure to pull the spline tight when installing it. This will help to keep the screen secure and prevent it from sagging. * If you're installing a new screen on a door that has a pet, be sure to choose a pet-resistant screen material. This will help to prevent your pet from tearing the screen.