How To Remove Concrete Patio

Concrete patios can be a great addition to any home, but they can also be a pain to remove if you decide you no longer want them. The good news is that removing a concrete patio is not as difficult as it may seem, and it can be done by do-it-yourselfers with the right tools and a little bit of know-how.

Tools and Materials You Will Need

Before you begin, you will need to gather the following tools and materials:

Jackhammer or sledgehammer
Chisel or pry bar
Wheelbarrow or bucket
Shovel
Safety glasses
Gloves
Dust mask

Preparing the Area

Once you have gathered your tools and materials, you need to prepare the area for removal. This involves clearing away any furniture or other objects from the patio and marking the edges of the patio with chalk or paint.

Breaking Up the Concrete

The next step is to break up the concrete. This can be done with a jackhammer or a sledgehammer. If you are using a jackhammer, be sure to wear hearing protection. Start by breaking up the concrete into small pieces. Once the concrete is broken up, you can use a chisel or pry bar to remove the pieces.

Removing the Concrete Pieces

Once the concrete is broken up, you can use a wheelbarrow or bucket to remove the pieces. Be sure to wear gloves when handling the concrete pieces, as they can be sharp.

Digging Out the Base

Once the concrete pieces have been removed, you need to dig out the base of the patio. This can be done with a shovel. Be sure to dig down to the level of the surrounding soil.

Filling In the Hole

Once the base has been dug out, you can fill in the hole with soil or gravel. Be sure to tamp down the soil or gravel to prevent it from settling.

Tips for Removing a Concrete Patio

Here are a few tips for removing a concrete patio:

Be sure to wear safety glasses, gloves, and a dust mask when removing a concrete patio.
Start by breaking up the concrete into small pieces.
Use a wheelbarrow or bucket to remove the concrete pieces.
Dig out the base of the patio to the level of the surrounding soil.
Fill in the hole with soil or gravel and tamp it down.