How To Level A Concrete Patio

If your concrete patio is uneven or sloping, it can be a tripping hazard and make it difficult to enjoy your outdoor space. Leveling a concrete patio is a relatively simple project that can be completed in a few hours. Here are the steps on how to level a concrete patio:

1. Gather your materials. You will need the following materials to level a concrete patio:

A level
A concrete leveling compound
A trowel
A bucket
Water
A broom

2. Prepare the concrete patio. Sweep the concrete patio to remove any dirt or debris. If the concrete patio is very dirty, you may need to use a pressure washer to clean it.

3. Mix the concrete leveling compound. Follow the manufacturer's instructions to mix the concrete leveling compound. The concrete leveling compound should be mixed to a thick, creamy consistency.

4. Apply the concrete leveling compound. Apply the concrete leveling compound to the low spots in the concrete patio. Use a trowel to spread the concrete leveling compound evenly. The concrete leveling compound should be applied in a thin layer, about 1/4 inch thick.

5. Level the concrete leveling compound. Use a level to check if the concrete leveling compound is level. If the concrete leveling compound is not level, use a trowel to smooth it out. (If you are leveling a large area, you may want to use a screed board to level the concrete leveling compound.)

6. Allow the concrete leveling compound to dry. The concrete leveling compound will typically take about 24 hours to dry. Do not walk on the concrete leveling compound until it is completely dry.

7. Finish the concrete patio. Once the concrete leveling compound is dry, you can finish the concrete patio by applying a sealer. The sealer will help to protect the concrete patio from stains and wear. (If you are applying a stamped concrete finish, you will need to apply the sealer before stamping the concrete.)