How To Cover Cracked Concrete Patio

A cracked concrete patio can be an eyesore, but it doesn't have to be permanent. There are a few different ways to cover up cracked concrete, depending on the severity of the damage. For small cracks, you can simply fill them in with a concrete patch. For larger cracks, you may need to use a concrete overlay or a resurfacer.

Fill In Small Cracks

If the cracks in your concrete patio are small, you can simply fill them in with a concrete patch. This is a relatively easy and inexpensive way to repair cracked concrete. To fill in cracks, you will need the following materials:

Concrete patch
Trowel
Water

To fill in cracks, follow these steps:

1. Clean the cracks with a wire brush to remove any dirt or debris. 2. Wet the cracks with water. 3. Apply the concrete patch to the cracks using a trowel. 4. Smooth the concrete patch over the cracks. 5. Allow the concrete patch to dry for 24 hours.

Use A Concrete Overlay

If the cracks in your concrete patio are larger, you may need to use a concrete overlay. A concrete overlay is a thin layer of concrete that is applied over the existing concrete. This can help to hide cracks and other imperfections in the concrete. To apply a concrete overlay, you will need the following materials:

Concrete overlay
Trowel
Water

To apply a concrete overlay, follow these steps:

1. Clean the concrete patio with a pressure washer to remove any dirt or debris. 2. Apply a bonding agent to the concrete patio. This will help the concrete overlay to adhere to the existing concrete. 3. Apply the concrete overlay to the concrete patio using a trowel. 4. Smooth the concrete overlay over the concrete patio. 5. Allow the concrete overlay to dry for 24 hours.

Use A Resurfacer

If the cracks in your concrete patio are severe, you may need to use a resurfacer. A resurfacer is a thick layer of concrete that is applied over the existing concrete. This can help to hide cracks and other imperfections in the concrete and can also make the concrete patio look like new. To apply a resurfacer, you will need the following materials:

Resurfacer
Trowel
Water

To apply a resurfacer, follow these steps:

1. Clean the concrete patio with a pressure washer to remove any dirt or debris. 2. Apply a bonding agent to the concrete patio. This will help the resurfacer to adhere to the existing concrete. 3. Apply the resurfacer to the concrete patio using a trowel. 4. Smooth the resurfacer over the concrete patio. 5. Allow the resurfacer to dry for 24 hours.