How To Adjust Andersen Patio Doors

Andersen patio doors are a popular choice for homeowners, as they are well-made and durable. However, even the best doors can need to be adjusted from time to time. If your Andersen patio door is not opening or closing properly, there are a few simple adjustments you can make to fix the problem.

Adjusting the Hinges

The hinges on your Andersen patio door are responsible for allowing the door to open and close smoothly. If the door is not opening or closing properly, the hinges may need to be adjusted. To adjust the hinges, you will need a Phillips head screwdriver.

Open the door and locate the hinges. There are two hinges on each side of the door.
Loosen the screws on the bottom hinge. Do not remove the screws completely.
Lift the door up slightly and then tighten the screws on the bottom hinge.
Repeat steps 2 and 3 for the top hinge.
Close the door and check to see if it is opening and closing properly.

Adjusting the Strike Plate

The strike plate is the metal plate that the door latch hooks onto when the door is closed. If the strike plate is not aligned properly, the door may not latch properly or it may be difficult to open.

Locate the strike plate on the door jamb. It is usually located on the side of the jamb that the door latch hooks onto.
Loosen the screws that hold the strike plate in place. Do not remove the screws completely.
Move the strike plate up or down until the door latch hooks onto it properly.
Tighten the screws to secure the strike plate in place.
Close the door and check to see if it is latching properly.

Adjusting the Door Sweep

The door sweep is a rubber or vinyl strip that is attached to the bottom of the door. It helps to keep out drafts and water. If the door sweep is not adjusted properly, it may not seal properly and the door may not open or close properly.

Open the door and locate the door sweep. It is usually attached to the bottom of the door with screws.
Loosen the screws that hold the door sweep in place. Do not remove the screws completely.
Move the door sweep up or down until it seals properly against the threshold.
Tighten the screws to secure the door sweep in place.
Close the door and check to see if it is opening and closing properly.

These are just a few simple adjustments that you can make to your Andersen patio door. If you are having problems with your door that you cannot fix yourself, you should contact a qualified handyman or contractor.