Do It Yourself Patio Table Top

A patio table is a great way to enjoy the outdoors and entertain guests. If you're looking for a way to save money and add a personal touch to your patio, you can make your own table top. Here's how:

Materials you'll need:

1 sheet of 3/4-inch plywood (4 feet x 8 feet)
1 can of wood glue
1 box of 1 1/4-inch wood screws
1 jigsaw
1 drill
1 sander
1 paintbrush
1 gallon of exterior paint
1 can of clear polyurethane

Instructions:

1. Cut the plywood to size. The size of your table top will depend on the size of your patio table base. If you're not sure what size to cut it, measure the base and add 6 inches to each side. 2. Glue the plywood together. Apply a generous amount of wood glue to the edges of one sheet of plywood. Align the edges of the two sheets of plywood and press them together. Use clamps to hold the plywood in place while the glue dries. 3. Drill pilot holes. Once the glue has dried, drill pilot holes around the perimeter of the table top. This will help prevent the wood from splitting when you drive the screws in. 4. Screw the plywood together. Drive 1 1/4-inch wood screws through the pilot holes and into the plywood. Be sure to countersink the screws so that they are flush with the surface of the wood. 5. Sand the table top. Use a sander to smooth the surface of the table top. Start with a coarse-grit sandpaper and then switch to a finer-grit sandpaper until the surface is smooth. 6. Paint the table top. Apply a coat of exterior paint to the table top. Allow the paint to dry completely. 7. Apply a coat of polyurethane. Apply a coat of clear polyurethane to the table top. This will help protect the table from the elements.

Tips:

* If you want to add a decorative edge to your table top, you can use a jigsaw to cut out a design. * You can also use different types of wood for your table top, such as cedar or redwood. * If you're not sure how to paint your table top, you can consult with a professional. Your patio table top is ready to enjoy!