Pella Patio Door Lock Replacement

Replacing a Pella patio door lock is a relatively easy project that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a professional to do the job.

Tools and materials you will need:

Phillips head screwdriver
Flat head screwdriver
New Pella patio door lock
Drill
1/8-inch drill bit
Safety glasses

Step-by-step instructions:

1. Safety first! Put on your safety glasses before you begin.

2. Remove the old lock. Use a Phillips head screwdriver to remove the two screws that hold the old lock in place. Once the screws are removed, you can pull the old lock out of the door.

3. Install the new lock. Insert the new lock into the door and align it with the holes for the screws. Use a Phillips head screwdriver to tighten the screws until the lock is secure.

4. Test the lock. Open and close the door to make sure that the lock is working properly. The door should lock and unlock smoothly.

5. Replace the strike plate. If the new lock came with a new strike plate, you will need to replace the old one. Use a flat head screwdriver to remove the screws that hold the old strike plate in place. Once the screws are removed, you can pull the old strike plate off of the door frame. Install the new strike plate by aligning it with the holes for the screws and tightening the screws until the strike plate is secure.

6. Test the lock again. Open and close the door to make sure that the lock is still working properly. The door should lock and unlock smoothly.

Congratulations! You have now successfully replaced the lock on your Pella patio door.