How To Measure Patio Door For Replacement

If you are planning to replace your patio door, it is important to measure it accurately to ensure that the new door will fit properly. Here are the steps on how to measure a patio door for replacement:

1. Determine the type of patio door you have

There are two main types of patio doors: sliding doors and hinged doors. Sliding doors move horizontally on a track, while hinged doors swing open like a regular door. Once you know the type of patio door you have, you can proceed to the next step.

2. Measure the width of the door opening

To measure the width of the door opening, use a measuring tape to measure the distance between the inside edges of the door frame. Be sure to measure at the top, middle, and bottom of the opening, and use the smallest measurement.

3. Measure the height of the door opening

To measure the height of the door opening, use a measuring tape to measure the distance between the top of the door frame and the floor. Be sure to measure at the left, middle, and right sides of the opening, and use the smallest measurement.

4. Measure the depth of the door opening

The depth of the door opening is the distance from the inside edge of the door frame to the outside edge of the wall. To measure the depth of the opening, use a measuring tape to measure the distance between the inside edge of the door frame and the outside edge of the wall. Be sure to measure at the top, middle, and bottom of the opening, and use the smallest measurement.

5. Add an inch to the width and height measurements

When ordering a new patio door, it is important to add an inch to the width and height measurements. This will ensure that the new door will fit properly in the opening.

6. Order the new patio door

Once you have the measurements, you can order the new patio door. Be sure to provide the manufacturer with the width, height, and depth measurements, as well as the type of door you have.