Glass Replacement For Patio Table

Glass Replacement for Patio Table

When the glass on your patio table is broken, it can be a real bummer. Not only is it unsightly, but it can also be dangerous if someone were to cut themselves on the broken glass. The good news is that replacing the glass on a patio table is a relatively easy and inexpensive project that you can do yourself. Here are the steps on how to do it:

1. Measure the glass. The first step is to measure the glass on your patio table. To do this, use a measuring tape to measure the length and width of the glass. Once you have the measurements, add 1 inch to each side to allow for overlap.

2. Cut the glass. Once you have the measurements, you need to cut the glass. To do this, you can use a glass cutter. If you don't have a glass cutter, you can rent one from a hardware store. When cutting the glass, be sure to wear safety glasses and gloves.

3. Clean the table. Before you install the new glass, you need to clean the table. To do this, use a damp cloth to wipe down the table. Be sure to remove all of the dirt and debris.

4. Apply silicone sealant. Once the table is clean, you need to apply silicone sealant to the perimeter of the table. To do this, use a caulk gun to apply a bead of silicone sealant around the edge of the table. Be sure to apply the sealant evenly.

5. Install the glass. Once you have applied the silicone sealant, you can install the glass. To do this, carefully place the glass on the table. Be sure to align the glass with the edges of the table. Once the glass is in place, press down on it to secure it.

6. Allow the silicone sealant to dry. Once the glass is installed, you need to allow the silicone sealant to dry. To do this, let the table sit undisturbed for 24 hours. Once the silicone sealant is dry, your patio table will be ready to use.